Menu
Need Help? Call us!
0430 484 233
0430 484 233
Waterproofing is a way to protect structures from water damage, making structures water-resistant, and screening material from erosion when it comes in contact with water.
The concept of waterproofing comes in handy when it comes to protecting buildings from water damage. The areas such as the roof, basement, foundation, bathroom, shower, and kitchen are more prone to water damage since these have somehow direct contact with water, and waterproofing is so common in making these areas water-resistant.
There are many types of waterproofing, some famous one are as follow:
Membrane waterproofing is a technique where the surface of the material (which is in contact with water) is covered with a membrane of a water-resistant material. This water-resistant or waterproofing material can be asphalt, bitumen, EPDM, PVC, and TPO.
Liquid waterproofing is another famous waterproofing technique. In Liquid waterproofing a liquid coating is applied on the surface of a material/structure to protect it from water damage. Acrylic, polyurethane, and epoxy are some famous waterproofing liquid coating materials used in liquid waterproofing.
Injection waterproofing is another waterproofing technique that involves the injection of resin or grout into the cracks or voids in the structure to make it waterproof/water-resistant. Injection waterproofing is most commonly used in the basement and foundation.
The best waterproofing solution for a particular application will depend on several factors, such as the type of structure, the environment, and the budget.
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Waterproofing can help you to protect your home from water damage and save yourself money on repairs in the long run.
Make sure your roof is in good condition and that all gutters and downspouts are clean and free of debris.
Install a sump pump in your basement to remove any water that seeps in.
Waterproof your wet areas, such as bathrooms and kitchens, by applying a membrane or coating to the walls and floors.
Waterproof your wet areas, such as bathrooms and kitchens, by applying a membrane or coating to the walls and floors.
These are the most frequently asked questions about Waterproofing Melbourne.
The weather and climate of Melbourne make its structures and materials so prone to water damage. Since Melbourne has a moderate temperature with four seasons, summers are generally warm and dry whereas winters are cold and wet. It also needs to be noted that Melbourne experiences good rainfall, with an estimated rainfall of 641mm per year. Due to these, it is crucial to save valuable structures and materials from water erodes and damage.
The best waterproofing solution for a particular application will depend on several factors, such as the type of structure, the environment, and the budget.
If you are unsure about the type of waterproofing that is best for your home, materials, and structures, we suggest you contact us or consult a qualified professional.
The cost of waterproofing is not that much high, but it depends on a number of factors such as the same of area to be waterproof, the type of waterproofing technique and material is used and
experience of the contractor. It is hard to give you an exact waterproofing rates, however the range of waterproofing cost in Melbourne is 50 AUD and 200 AUD per square meter for waterproofing service.
The curing time for waterproofing will vary depending on the type of waterproofing used. However, most waterproofing materials will cure within a day to three days. It is important to wait until the waterproofing has fully cured before using the area, otherwise its durability may decrease.
In order to maintain your waterproofing intact, you must inspect the waterproof surface regularly, if found any damage or erode, repair it again.
